Hudson-robotics Bar Code Print and Apply Instrukcja Użytkownika Pobierz pdf (Strona 13)

Print and Apply User Manual Hudson Robotics, Inc.

3. Once the media and print ribbon are installed, slide the edge of the

media backing between the air blast and strip bar. Once it is exposed

below the air blast, pull enough media through so it is long enough to

fit around the lower spindle. Tape the media to the lower spindle.

4. Once the media and ribbon are secured to the spindles, the print head

can be lowered back into position and closed. After the print head is

closed, the unit will be in a paused mode. To un-pause the printer,

simply press the pause button. Once the unit is un-paused, or powered

up, it will perform a short calibration requiring a feed of multiple

labels. Remove the built up labels from the air blast before running the

unit.

Pause Button

Build up after

calibration

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 32 33

Brak uwag

Hudson-robotics Bar Code Print and Apply Instrukcja Użytkownika Strona 13